BNVJD - 2209, ALUMINUM PAINT
- MSDS: BNVJD
- Manufacturer: EVR GARD COATINGS CO
- Product Name: 2209, ALUMINUM PAINT
- National Stock Number: 8010-00N030981
Product Identification
Product ID:2209, ALUMINUM PAINT
MSDS Date:07/15/1991
FSC:8010
NIIN:00N030981
MSDS Number: BNVJD
Responsible Party
PARAMOUNT, CA 90723
US
Emergency Phone: 213-531-0131
Info Phone: 213-531-0131
Cage: 5G582
Contractor
Telephone: 310-531-0131
Cage: 5G582
Ingredients
ALUMINUM (FLAKE)
CAS: 7429-90-5
RTECS: BD0330000
OSHA PEL 15MG/M3 DUST;5 FUME
ACGIH TLV: 10MG/M3 DUST;5 FUME
KEROSENE (PETROLUEM), HYDROTREATED; (MINERAL SPIRITS)
CAS: 64742-47-8
RTECS: OA5504000
OSHA PEL 500 PPM (MFR)
ACGIH TLV: 100PPM;200 STEL(MFR)
BENZENE
CAS: 71-43-2
RTECS: CY1400000
OSHA PEL 10 PPM (MFR)
ACGIH TLV: 0.1 PPM
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL: IRRIT OF NOSE, THROAT & EYES,
DIZZ, WEAK, FATG, NAUS, HDCH. SYMP DISAPPEAR WHEN EXPOS CEASES.
EYE/SKIN CONT MAY CAUSE IRRIT. RPTS HAVE SHOW THAT RPTD & PRLNG
OCUP OVEREXP TO SOLV CAN CAUSE PERM BRAIN DAM & NERV SYS DAM.
Explanation of Carcinogenicity:BENZENE: GROUP 2A(IARC), GROUP 2(NTP).
Effects of Overexposure:INHAL: EXCESSIVE INHAL OF VAP MAY RSLT IN DIZZ
& HDCH. UNCON IN EXTREME CASES. SKIN/EYE: IRRITANT. SKIN
ABSORPTION: IRRITANT. AFFECTED AREA WILL SHOW SIGNS OF RED & RASH
IF NOT WASHED W/SOAPY WATER IM MED. INGEST: IRRIT OF RESP TRACT
CHARACTERIZED BY HDCH, DIZZ, STAGG, CONFUSN & UNCON & COMA IN
EXTREME CASES.
Medical Cond Aggravated by Exposure:PROLONGED OR REPEATED CONTACT MAY
CAUSE DERMATITIS.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. EYE: FLUSH WITH PLENTY OF WATER
FOR AT LEAST 15 MIN. SKIN: REMOVE SOAKED CLTHG & WASH SKIN W/SOAPY
WATER THORO. APPLY LOTION OR OIL TO AFFECTED AREA AFTER THORO
WASHING. IN GEST: DO NOT INDUCE VOMIT. CALL PHYS IMMED.
Fire Fighting
Flash Point Method:TCC
Flash Point:>100F,>38C
Lower Limits:1.0%
Upper Limits:6%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
FIGHT FIRE AS VOLATILE LIQUID FIRE. CLSD CONTR MAY EXPLODE WHEN
EXPOS TO EXTREME HEAT. KEEP AWAY (SUPP DATA)
Unusual Fire/Explosion Hazard:AVOID APPLICATN IN AREAS OF PILOT LIGHTS/
SPARKS/OTHER IGNIT SOURCES AS VAP MAY ACCUMULATE ON FLOOR & IGNITE.
KEEP CONTR CLSD TIGHTLY & STORE IN COOL (SUPP DATA
Accidental Release
Spill Release Procedures:ABSORB SPILL MATERIAL WITH ABSORBENTS, SUCH AS
SAWDUST, CLAYS, ETC., AND FLUSH SPILL AREA WITH LOTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE NEAR OPEN FLAME/SOURCES
OF IGNIT. DO NOT STORE IN HIGH TEMP STOR. IN CASE OF FIRE, REMOVED
CLOSED CONTR FROM AREAS EXPOS TO FIRE.
Other Precautions:EMPTY CONTAINERS USUALLY STILL HOLD RESIDUE OF
MATERIAL AND VAPORS. THESE MUST BE CONSIDERED HAZ AND DISPOSED OF
IN ACCORDANE WITH PROPER HANDLING PROCEDURES PRESCRIBED FOR
HAZARDOUS CHEMICALS.
Exposure Controls
Respiratory Protection:USE OF NIOSH/MSHA APPRVD RESP IS RECOM WHEN
USING SOLV BASED COATINGS. WHEN LEVEL OF SOLV VAP IS NOT
KNOWN/EXCEEDS LEVEL @ WHICH REGULAR RESP ARE EFTIVE, USE OF
NIOSH/MSHA APPRVD RESP SUCH AS TC-19C I S HIGHLY RECOMMENDED.
Ventilation:BE SURE TO PROVIDE ADEQ VENT IN ALL WORK AREAS @ ALL TIMES.
SERIOUS HLTH PROBLEMS COULD RSLT FROM RPTD/PROLONG EXPOS.
Protective Gloves:NEOPRENE, BUNA N.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE GLOVES & GOG TO PROTECT AGAINST
ACCIDENTAL SPLASHING OF LIQ ONTO SKIN/EYES. AVOID PRLNG
CONT/OVEREXP. (SUPP DATA)
Work Hygienic Practices:STANDARD HYGIENIC PRACTICES MUST BE OBSERVED
WHEN HANDLING PRODUCT AND ALL CHEMICALS.
Supplemental Safety and Health
HMIS(LEVIEN) HAS ASSIGNED HCC OF F5,BECAUSE MFR DOES NOT SPECIFY HOW
MUCH BENZENE IS IN THIS PRODUCT.FIRE FIGHT PROC: FROM AREAS EXPOSED
TO FIRE. EXPLO HAZ: PLACE WHEN NOT IN USE. OTHER PROT EQUIP: PR
OVIDE ADEQ VENT AT ALL TIMES WHEN APPLYING THIS PRODUCT.
Chemical Properties
HCC:F5
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:0.924(H2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT SOLUBLE
Appearance and Odor:SLIVER GRAY LIQUID, CHARACTERISTIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALIS. LONG TERM CONTACT WITH WATER.
Stability Condition to Avoid:AVOID OPEN FLAMES, WELDING ARCS OR OTHER
HIGH TEMPERATURE SOURCES WHICH INCLUDE THERMAL DECOMPOSITION AND
FIRE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CO2
&/OR CO.
Disposal
Waste Disposal Methods:DISPOSE OF ALL WASTES, INCLUDING ABSORBENTS USED
TO CLEAN UP SPILLS INTO 55-GAL METAL CONTAINERS AND DISPOSE IN
APPROVED DUMPSITE IN ACCORDANCE WITH PRESCRIBED FEDERAL, STATE AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.